Project by bwanamdogo | posted 06-16-2013 10:34 AM | 2723 views | 3 times favorited | 3 comments | ![]() |
![]() |
Designed this camping/safari table for 4-place dining. Clear white pine and brass hardware. Folds up for transport on your roof rack. The triangular lattice takes much of the weight away without sacrifice of strength. I cut the lattice by setting a table saw at 45 deg and flipping the board at each pass. No glue in this design.
-- Bwanamdogo
3 comments so far
Sodabowski
home | projects | blog
2404 posts in 4288 days
#1 posted 06-18-2013 08:38 AM
Classic, you nailed it perfect. Unlike the one I made from pallets a while ago… ;)
The 45° lattice is a very good idea!
-- Thomas - there are no problems, there are only solutions.
bwanamdogo
home | projects | blog
15 posts in 3261 days
#2 posted 06-18-2013 11:04 AM
Well, Sodabowski, I would prefer yours if I wanted to do some writing! Mine is limited to dining.
-- Bwanamdogo
Fishinbo
home | projects | blog
11362 posts in 3631 days
#3 posted 06-19-2013 02:47 PM
Wonderful folding table! Great design and build. I’m sure it’s a hit for the outdoors. Great job!
Have your say...