| Project by BArnold | posted 05-28-2013 12:01 PM | 1583 views | 3 times favorited | 4 comments |  |
 |
My wife had seen a lot of end tables and corner cabinets in furniture stores but she didn’t like any of them, nor did I. After quite a bit of design effort and changing this and that, we came up with what you see.
I used solid cherry and walnut for most of the parts. The top is cherry veneer over 3/4” plywood with an inlay of 1/4” solid walnut. The top is 30” by 30” and overall height is 21.5”
-- Bill, Thomasville, GA
4 comments so far
helluvawreck
home | projects | blog
32122 posts in 3839 days
#1 posted 05-28-2013 12:06 PM
This is a very nice piece and you did a fine job on it. Congratulations.
helluvawreck aka Charles
http://woodworkingexpo.wordpress.com
-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com
tenontim
home | projects | blog
2131 posts in 4717 days
#2 posted 05-28-2013 01:37 PM
Nice job, Bill. Good job on the veneer work. This piece needs to be posted again in a couple of years after the cherry darkens. Should be beautiful. Thanks for the post.
joseph000
home | projects | blog
346 posts in 2999 days
#3 posted 05-30-2013 10:38 AM
Nice design.End table is item of occasional furniture that should match with the other furniture in your living room.When choosing the perfect end table for your room, you want to make sure that it has the right style.
SPalm
home | projects | blog
5337 posts in 4854 days
#4 posted 06-01-2013 10:14 PM
Nice.
Love the way the bottom rail sweeps into the legs. Neat.
Steve
-- -- I'm no rocket surgeon
Have your say...