Jointer blade sharpening jig.

  • Advertise with us
Project by KCConst posted 05-26-2013 04:30 AM 2681 views 3 times favorited 2 comments Add to Favorites Watch

A copy of Woodshavers project.. Seemed like such a simple solution to a common problem. And it was. Congrats to Woodshaver. Thanks for the easy plan details.i used some reclaimed hard maple from old gym floor and some walnut for contrast. I book matched a rip of a small piece I had laying around. I used it on 3- 6” jointer blades, 220 grit wet/dry followed by 500grit. Fortunately I have a granite top table saw so a flat surface was easy to find. Worked like a charm. So easy, it’s almost comical. No reason to buy blades if you own one of these. Again thanks to LJ’s woodshaver who provided the details

-- "Don't let what you cannot do interfere with what you can do" Wooden

2 comments so far

View Wolffarmer's profile


407 posts in 3845 days

#1 posted 05-26-2013 05:47 AM

Cool. Fine furniture for a jig.

-- That was not wormy wood when I started working on it.

View  woodshaver Tony C   's profile

woodshaver Tony C

7123 posts in 3960 days

#2 posted 05-26-2013 11:25 AM

Glad I could help!
I like it when a tool looks as good as it works! Maple and Walnut are great together for some striking contrast.
Your jig came out very nice! Sharp looking too!
This is exactly what this site is all about. Showing your ideas and passing them on.
Gives me a good feeling when I know I help someone! Thank you for the compliments and enjoy the jig and the saving!

-- St Augustine FL, Experience is the sum of our mistakes!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics