Glue Gun Stand

  • Advertise with us
Project by Bricofleur posted 05-18-2013 02:40 PM 8512 views 43 times favorited 25 comments Add to Favorites Watch

Here’s a stand I made for my hot glue gun to end messes. Only two 3/4” plywwod scraps and a tin can required. Finally done.

More photos and all construction details on this page of my blog.

No more drops, no more mess. Yess!



-- Learn from yesterday, work today and enjoy success tomorrow. --

25 comments so far

View mariva57's profile


666 posts in 3288 days

#1 posted 05-18-2013 02:52 PM

Good idea, compliments.

-- The common man thinks. The wise man is silent. The stupid man discusses.

View Belg1960's profile


1153 posts in 4349 days

#2 posted 05-18-2013 03:14 PM

The mother of invention produces results every time. Nice solution.

-- ***Pat*** Rookie woodworker looking for an education!!!

View Ivan's profile


17049 posts in 4151 days

#3 posted 05-18-2013 03:15 PM

Very original idea. I wondered what else you didn’t invent. This would never cross my mind.To serious to be funny.

-- Ivan, Croatia, Wooddicted

View Sandra's profile


7207 posts in 3359 days

#4 posted 05-18-2013 03:16 PM

Love the sardine/kipper can! Great idea.

-- No, I don't want to buy the pink hammer.

View Firebreather's profile


106 posts in 3390 days

#5 posted 05-18-2013 04:30 PM

I like this design. this will work great in my wifes scrapbook room.

-- God is good..All the time

View Routerisstillmyname's profile


763 posts in 4792 days

#6 posted 05-18-2013 05:37 PM

Just walked in with a new GG from HF this will be handy. THX

-- Router รจ ancora il mio nome.

View NiteWalker's profile


2743 posts in 3860 days

#7 posted 05-18-2013 06:52 PM

Once again serge, your genius provides us with another shop invention that will get a lot of use.
Well done.

-- He who dies with the most tools... dies with the emptiest wallet.

View Bluepine38's profile


3393 posts in 4369 days

#8 posted 05-18-2013 07:32 PM

Simple, but very useful, plus it only takes a few minutes to make since you thought of all the shortcuts for us.
Thank you for sharing.

-- As ever, Gus-the 82 yr young apprentice carpenter

View Northwest29's profile


1713 posts in 3774 days

#9 posted 05-18-2013 09:18 PM

Super and simple idea! Will have to make one for my shop as to date I have just been using a piece of cardboard to catch the drips. One question- since you have used screws to attach the tin to the wood how do you get it off when full? Pry it off?

-- Ron, "Curiosity is a terrible thing to waste."

View peteg's profile


4438 posts in 4106 days

#10 posted 05-18-2013 10:06 PM

Thanks for this one Serge, I use a lot of hot melt with my turning & it’s always a pain what to do with the gun while it is still hot & driping, see ya I’m of the the shed to make a stand ::))

-- Pete G: If you always do what you always did you'll always get what you always got

View Bricofleur's profile


1482 posts in 4476 days

#11 posted 05-18-2013 10:30 PM

Thank you all, guys! I’m glad you like the stand. And I don’t wonder why! Well, it’s all about sharing, as usual.

@Northwest29: Don’t wait until it’s full and unscrew the useful free tin to replace for a new one.



-- Learn from yesterday, work today and enjoy success tomorrow. --

View Woodbridge's profile


3751 posts in 3701 days

#12 posted 05-18-2013 10:59 PM

great idea!

-- Peter, Woodbridge, Ontario

View NiteWalker's profile


2743 posts in 3860 days

#13 posted 05-19-2013 02:34 AM

@Northwest29: You could always wax or oil the tin and the glue would never stick to it.

-- He who dies with the most tools... dies with the emptiest wallet.

View redryder's profile


2393 posts in 4385 days

#14 posted 05-19-2013 05:19 AM

You’ve done it again (favorite)...........................

-- mike...............

View bear2's profile


29 posts in 4460 days

#15 posted 05-19-2013 01:05 PM

Great idea! I’ll be making one very soon.

-- It isn't always about being fast or even accurate that counts, it's being willing

showing 1 through 15 of 25 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics