A Beter Picture Of My Assembly Table it is 4ft wide x 8 ft long by 34 inches high

  • Advertise with us
Project by Jim Reeves posted 05-15-2013 05:19 PM 1561 views 0 times favorited 3 comments Add to Favorites Watch

Same info up just better pictures as well added the ful size shelf below stores allot of tool boxes, belt disk sander spelling crappy today. The 2×4s every 14 inches across under plywood top. thanks for looking

-- jim

3 comments so far

View lew's profile


13143 posts in 4556 days

#1 posted 05-15-2013 06:18 PM

Very Nice!
Wish I had more room for something like this.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View jack1's profile


2150 posts in 4828 days

#2 posted 05-16-2013 10:43 PM

YOu can bowl a few frames between projects now… ;0)

-- jack -- ...measure once, curse twice!

View Jim Reeves's profile

Jim Reeves

211 posts in 3824 days

#3 posted 05-16-2013 11:55 PM

Thanks lew and jack1 for your kind comments, l have wanted a large assembly table for some time a few years now. Having it 4×8 ft l can have a few projects on the go at the same time, mainly built it this big l build allot of shelves. Going to put holes in top across the 48 inches at 24’’, 30’’, 36’’ and put 1’’ dowels in at above measurements the dowels will support shelf sides as l assemble them.
The shelf below is 43’’ wide x 87’’ long and 18’’ high holds miter saws, disc/belt sanding machine, 4-5 large tools boxes and 3 of these rotating mail holdersa each one has plastic jar type containers these thing rotate around and can unscrewe the jar type container holds screws, nuts, hardware etc very nice my son bought me 3 of them.

thanks again for nice comments

-- jim

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics