Maple veggie dish

  • Advertise with us
Project by GenuineGeek posted 05-02-2013 08:29 PM 1456 views 7 times favorited 10 comments Add to Favorites Watch

There is some figuring in this piece of maple, but I thought it was stable, and it was, until I started cutting into it. Only when I got it thinner I found a small crack in the figured area. Thankfully the crack proved stable.
It could be used without a dip bowl or with one that I bought at Ikea.
Sanded up through the grits through to 400, then finished with Watco brand “Butcher Block Finish”

-- Don't try to figure it out... just turn it.

10 comments so far

View dtzeutschler's profile


6 posts in 2452 days

#1 posted 05-02-2013 08:39 PM

Wow great maple project!

View Rickterscale's profile


167 posts in 2845 days

#2 posted 05-02-2013 09:39 PM

Looks great. Beautiful finish on that!

View branch's profile


1142 posts in 3638 days

#3 posted 05-02-2013 09:56 PM

hi great looking dip bowl i like it fantastic finish


View BobWemm's profile


2680 posts in 2410 days

#4 posted 05-02-2013 11:43 PM

Love the contrast and the figure in that maple. Excellent finish.

-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View Jim Jakosh's profile

Jim Jakosh

23232 posts in 3590 days

#5 posted 05-03-2013 12:36 AM

Very nice dish and great finish!!............JIm

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View prattman's profile


447 posts in 2602 days

#6 posted 05-03-2013 02:18 AM

Love it !!!!

-- Everyone calls me Ed or Eddie , mom still calls me Edward if she is mad at me.

View wiser1934's profile


528 posts in 3631 days

#7 posted 05-03-2013 03:05 AM

beautiful platter. what size blank?

-- wiser1934, new york

View GenuineGeek's profile


158 posts in 2465 days

#8 posted 05-03-2013 03:42 AM

It started as a cut off from a 9 inch wide board that was 1 inch thick rough. I cut it an an angle and glued in the accent wood (I forget what kind), then I cut off the corners with a chop saw before turning it. Ended up at about 8 1/4 in diameter and about 3/4 inch thick.

-- Don't try to figure it out... just turn it.

View Craig Havran's profile

Craig Havran

346 posts in 3096 days

#9 posted 05-03-2013 01:17 PM

Nice work.

-- "There's plenty of time to read the instruction manual when you're laying in the hospital bed". - Dad

View Fishinbo's profile


11362 posts in 2660 days

#10 posted 05-06-2013 02:02 PM

Cool dish! Like the beautiful design, wood choice and also the finish. Great job!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics