Outfeed table

  • Advertise with us
Project by pendledad posted 04-14-2013 02:57 AM 2326 views 2 times favorited 5 comments Add to Favorites Watch

Had some 5/8” rock solid 50 year old plywood laying around the shop. I did a simple “L” leg design. I dont have a router, so i ripped some 1/2” ply two create the two channels for the mitre slots.

It is awesome because i dont have to fiddle around with the outfeed roller any more. Thanks for looking.

5 comments so far

View jeff's profile


1306 posts in 4547 days

#1 posted 04-14-2013 04:09 AM

nice addition to your shop…

-- Jeff,Tucson,Az.

View hotbyte's profile (online now)


1057 posts in 4057 days

#2 posted 04-14-2013 12:10 PM

Looks great! I built similar outfeed table using L shaped plywood legs put together with pocket hole screws. It is very nice to have that support behind the saw!

View whitebeast88's profile


4128 posts in 3272 days

#3 posted 04-14-2013 05:20 PM

great job.should be very handy.

-- Marty.Athens,AL

View Violaine's profile


68 posts in 3904 days

#4 posted 04-14-2013 07:16 PM

you dont have a router? but i read it correctly…

will make mine soon! wow, i need that so mcuh space!

View Robb's profile


660 posts in 5016 days

#5 posted 04-15-2013 09:13 AM

Ripping the ply was a good workaround for lacking a router. That’s what I love about woodworking; it’s all about coming up with different solutions for the problem at hand. Your shop looks great.

-- Robb

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics