Carving Stand

  • Advertise with us
Project by KentB posted 03-21-2013 04:15 PM 1307 views 0 times favorited 3 comments Add to Favorites Watch

This is a stand I made for my son in-laws wood carvings. What’s shown on the stand is only a small portion of his work. The picture were taken with a cell phone so they are not the best. The stand is made from some walnut boards he had stored in a shed he used to own. It was pretty dry and had a number of worm holes and grooves in it. It’s a very rustic piece. The sides are angled in at 3 or 5 degrees, I can’t remember. It also slopes 3 to 5 degrees on the front face so the shelves get narrower as you go up. It’s a knock-down stand. The pins in the ends of the shelves hold it all together.

-- Kent B

3 comments so far

View Courtney 's profile


49 posts in 2938 days

#1 posted 03-21-2013 08:43 PM

I really like the shelf. Walnut is one of my favorites. I also really how you cut “windows” in each side. Great visibility for your son-in-law’s display.

-- It's very common for people to separate things they do from the things they need. - Jogge Sundqvist

View Fishinbo's profile


11362 posts in 3061 days

#2 posted 03-25-2013 02:22 PM

Fantastic stand! Great wood and great design. It’s just fitting for the beautiful carvings. Outstanding work!

View helluvawreck's profile


32122 posts in 3752 days

#3 posted 03-25-2013 02:28 PM

It makes a wonderful stand for his carvings. Nice work, Kent.

helluvawreck aka Charles

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics