Veritas router table/Incra jig setup

  • Advertise with us
Project by The Box Whisperer posted 02-23-2013 05:55 PM 4116 views 2 times favorited 1 comment Add to Favorites Watch

Not a lot to show, I mounted my portable router table flush with my bench. I built storage in my bench itself for wrenches and bits, the same way I did for my pocket hole jig.

I should probably be writing a review on the veritas table and the original incra jig, as they are both great tools.

When attaching the incra, the birch ply base it sits on has a little strip of MDF I glued on which rides the edge of the bench, which self squares the fence. A strip of low friction tape helps it slide. When I got the table, I couldnt bring myself to spend 40 bucks on the matching magnetic dust port, so I built my own for less then 5 bucks.

I do a lot of work at the router, so its nice to have it up at a proper height for me.

Any and all feedback is welcome.

-- "despite you best efforts and your confidence that your smarter and faster than a saw blade at 10k rpm…. your not …." - Charles Neil

1 comment so far

View doncutlip's profile


2832 posts in 4561 days

#1 posted 02-24-2013 05:11 PM

That looks like a fine setup

-- Don, Royersford, PA

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics