Christmas Cutting Board

  • Advertise with us
Project by Tommy posted 01-04-2013 02:23 PM 1305 views 0 times favorited 3 comments Add to Favorites Watch

This is a simple long grain cutting board intended more for display than work load. It is made from Cherry and Walnut and was originally from 2” stock but it’s probably more like 1.75 finished height. I bought the feet with 1/2in screws from Home Depot and have been using them on cutting boards for a while now. The board is finished with 2 coats of mineral oil and then a 3rd coat of mineral oil mixed with wax.

-- Tommy, ---- It's Never Crowded On the Extra Mile.

3 comments so far

View shopmania's profile


702 posts in 4525 days

#1 posted 01-04-2013 04:38 PM

Nice looking board Tommy!

-- Tim, Myrtle Beach, [email protected] Just one more tool, that's all I need! :)

View Surfside's profile


3389 posts in 3516 days

#2 posted 01-04-2013 04:54 PM

You always amaze me with your projects!

-- "someone has to be wounded for others to be saved, someone has to sacrifice for others to feel happiness, someone has to die so others could live"

View Ken90712's profile


18106 posts in 4531 days

#3 posted 01-04-2013 08:13 PM

Nice work. Boards are fun and addicting. I have made over 250 of them. I need to make another batch soon. I use the rubber feet like this from HD as well I found they grip better. Well done.

-- Ken, "Everyday above ground is a good day!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics