End Grain Cutting Board - Degoose class completed!

  • Advertise with us
Project by lanwater posted 12-23-2012 06:03 AM 5401 views 13 times favorited 15 comments Add to Favorites Watch
End Grain Cutting Board - Degoose class completed!
End Grain Cutting Board - Degoose class completed! No picture No picture No picture No picture No picture
Zoom Pictures

I finally completed Larry’s (degoose) class: End Grain Cutting Board LJ Class 006

Larry put out a great series of blogs with some very nice videos that makes it easy to build one.

Thanks Larry!

I read the material and watch the video a couple of times then headed to the shop.

wood used: Hard maple, Chery an Walnut; all 8/4

juice groove was cut on the router table.

The pictures were taken with a smartphone and are terrible.

This boards with few others went as a raffle price to raise money to buy more tools for the class.

-- Abbas, Castro Valley, CA

15 comments so far

View a1Jim's profile


118296 posts in 4861 days

#1 posted 12-23-2012 06:14 AM

In this case it’s those who teach Can and those who learn Can .good job on both counts


View Dusty56's profile


11866 posts in 4972 days

#2 posted 12-23-2012 06:15 AM

Definitely worth the extra effort !! Great looking board : )

-- I'm absolutely positive that I couldn't be more uncertain!

View lanwater's profile


3113 posts in 4218 days

#3 posted 12-23-2012 06:32 AM

Thanks a1jim and dusty56.

I forgot to put the link to our community woodworking class:

Castro Valley Adult and Career Education

The teatcher Jim Vice is top notch. Machinist for 30 years and woodworker for over 20.

Every year we have a christmas party and the money raised goes to buying extra tools. we just got 2 new industrial sawstop tablesaws.

-- Abbas, Castro Valley, CA

View deon's profile


2522 posts in 4309 days

#4 posted 12-23-2012 07:32 AM

Looks great!

-- Dreaming patterns

View Diggerjacks's profile


2330 posts in 4422 days

#5 posted 12-23-2012 07:54 AM

Hello Lanwater

A fantastic job ( as usual ) on this endgrain cutting board

A nicely looking board

In 2013 the challenge for me will be to make one like this …...

Merry chrsitmas and happy new year Lanwater

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View degoose's profile


7285 posts in 4638 days

#6 posted 12-23-2012 08:53 AM

Took you a while but you nailed it… that is for sure… well done… Contact MsDebbie and get you certificate…
Merry Xmas to you and yours…

-- Be safe.

View Bob A in NJ's profile

Bob A in NJ

1359 posts in 5283 days

#7 posted 12-23-2012 10:07 AM

I had forgotten about this one but now have too add it to my to do list. Thanks and merry Christmas. Bob

-- Bob A in NJ

View Roger's profile


21055 posts in 4088 days

#8 posted 12-23-2012 11:58 AM

Tis a really nice cuttin board

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View Monte Pittman's profile

Monte Pittman

30651 posts in 3622 days

#9 posted 12-23-2012 03:01 PM

Good job, i better check out that class.

-- Nature created it, I just assemble it.

View patron's profile


13722 posts in 4625 days

#10 posted 12-23-2012 06:25 PM

a real sweet deal here lan

glad you got it worked out

you did a great job

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View bubbs's profile


126 posts in 3361 days

#11 posted 12-23-2012 07:34 PM

Excellent. My “to do” list is growing FAR too big! Good job.

-- Cats, beer and wood...perfect.

View lanwater's profile


3113 posts in 4218 days

#12 posted 12-23-2012 09:43 PM

Thank you all for the nice comments.

Mery christmas and a happy and prosperous new year.

-- Abbas, Castro Valley, CA

View scrollingmom's profile


1212 posts in 3748 days

#13 posted 12-26-2012 01:33 AM

I think it looks great, you did great!

-- Kelly, Allen,KS

View SteveA's profile


26 posts in 4347 days

#14 posted 12-27-2012 06:35 AM

Great board. I just recently read the articles on this style board. Can’t wait to make one for my daughter who is an aspiring chef.

View jetwhoop's profile


89 posts in 3402 days

#15 posted 01-10-2013 01:20 AM

Great cutting board. looking at this is giving me some ideas I want to try.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics