DVD Storage and Knight Stand

This was made for Grate-grandson’s Christmas. It was made from scrap wood left over from a lot of other projects. The only thing I had to buy was the hinges and knobs. It is mostly 1/4” oak plywood, and red oak. The drawers are 3/4” poplar on the sides, 1/2” plywood front and back, and 1/4” plywood bottom. The drawer pulls are painted oak. All of the oak showing is stained “Golden Oak” and everything else is painted with gray tinted primer. there are 2 coats of Poly over everything. The overall measurements are 28” high X 22” wide X 19” deep.

-- Measure twice, cut once, and hope for the best.