Candle Holders

  • Advertise with us
Project by HickoryHill posted 11-24-2012 09:12 PM 4124 views 9 times favorited 5 comments Add to Favorites Watch

This started out as another version and ended up here! My original thought was to see what it would looks like if I did the plywood layers vertical just by themselves. After getting the stock glued up, I thought maybe horizontal would look better and decided to add on a contrasting color to the top and bottom. Several layers of 1/2 Baltic Birch (it’s what I had) and Walnut on top and bottom with a Deft Satin Finish. Glass sticks up about 1/8”.

Dimensions: 3.25” x 3.25” x 3.75”H

Side Note: Not sure if it works on my trivet I recently made or not.

-- Jim, Michigan

5 comments so far

View a1Jim's profile


118161 posts in 4628 days

#1 posted 11-24-2012 10:40 PM

Cool design Jim nice work.


View zlatanv's profile


691 posts in 4285 days

#2 posted 11-24-2012 11:55 PM

Very cool, i like how the grain of the ply alternates at the corners.

-- Z, Rockwall, TX

View Ivan's profile


16719 posts in 3918 days

#3 posted 11-25-2012 06:24 AM

It’s realy nice. I will sure steal some ideas from you.

-- Ivan, Croatia, Wooddicted

View ybotyawnoc's profile


78 posts in 3121 days

#4 posted 11-25-2012 09:51 AM

These are really nice!

View ugoboy's profile


143 posts in 4085 days

#5 posted 11-25-2012 02:42 PM

This came out really clean. Simple, nice job!

-- ~ Guy Woodward, Pflugerville Texas

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics