Washbasin Cabinet

  • Advertise with us
Project by hans2wiz posted 11-07-2012 01:32 PM 1450 views 1 time favorited 1 comment Add to Favorites Watch

Here is my latest work, which came out quite well. I used the full oak parquet, that was glued together under press. To achieve the correct thickness and smoothness, I made jig for my router and addition to my workbench. This and many other things, perhaps a separate blog at a later time. In the process, I discovered hand-planes because the stage was just like one of the best to get ready. Worktop edges are laminated oak and drawers are made of birch plywood. For finishing I used semi-gloss boat lacquer.

-- -- Hanno -- small steps, long way to go

1 comment so far

View Ken90712's profile


17819 posts in 3794 days

#1 posted 11-07-2012 07:46 PM

Very cool design, well done.

-- Ken, "Everyday above ground is a good day!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics