Wands in the making

  • Advertise with us
Project by Craig Ousterling posted 11-05-2012 05:26 PM 1240 views 0 times favorited 1 comment Add to Favorites Watch

The making of a wand. First picture is the exotic woods turned to rough diameter with block of maple end caps not yet cut or turned down. Next is the maple caps stick after it had been cut down and turned. 3rd picture is drilling connection hole and part off location. With a small exacto blade the cap is parted off then mounted alone to be faced and sanded.

Last picture shows whole assembly glued up and clamped together. Top is wenge and bottom is cocobolo. I’ll turn the final diameter tonight and post some more pictures tomorrow.

1 comment so far

View Craig Ousterling's profile

Craig Ousterling

13 posts in 2512 days

#1 posted 11-06-2012 08:31 PM

Almost finished with the cocobolo stick.

aaaaaand…... DONE!

Next up is the wenge and others….

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics