Project by bake | posted 10-20-2012 05:53 AM | 32037 views | 37 times favorited | 12 comments | ![]() |
![]() |
I was reviewing my favorites and noticed the kerfmakers everyone had been building some time ago, so I decided to have a go.
Made from mahogany and hard maple for the runner.
I had to go to the local ACE to find some brass hardware, I never could find a fender washer that was brass so I wound up using a nickel. (I think I remember Mafe using a coin on one of his.)
Finished with shellac and wax.
-- I love the smell of Home Depot in the morning, it smells like.......carpentry. Bake, Bar Lazy U Woodworks, Lehi,UT.
12 comments so far
murch
home | projects | blog
1380 posts in 4080 days
#1 posted 10-20-2012 06:56 AM
Sweet looking new tool, Bake. Seems to work pretty good too.
-- A family man has photos in his wallet where his money used to be.
jap
home | projects | blog
1251 posts in 3509 days
#2 posted 10-20-2012 12:29 PM
looks great
-- Joel
Grumpymike
home | projects | blog
2504 posts in 3770 days
#3 posted 10-20-2012 07:03 PM
Nice tool, looks great and you did a beautiful job on it … really like the coin idea …
now could you explain what it is for ???
-- Grumpy old guy, and lookin' good Doin' it. ... Surprise Az.
antkn33
home | projects | blog
62 posts in 4898 days
#4 posted 10-20-2012 11:02 PM
Looks awesome. How did you cut the slot so straight and smooth?
kiefer
home | projects | blog
5852 posts in 4122 days
#5 posted 10-21-2012 12:39 AM
Beautiful tool,like the brass fittings ,really makes it look professional.
-- Kiefer https://www.youtube.com/user/woodkiefer1/videos
NormG
home | projects | blog
6576 posts in 4459 days
#6 posted 10-21-2012 12:53 AM
Wonderful new tool
-- Norman - I never never make a mistake, I just change the design.
brewcrew24
home | projects | blog
5 posts in 4135 days
#7 posted 10-21-2012 02:34 AM
Grumpymike, hope this helps.
http://lumberjocks.com/projects/37668
rance
home | projects | blog
4282 posts in 4616 days
#8 posted 10-21-2012 03:19 AM
Nice job. And I think you’ll enjoy using it a lot.
-- Backer boards, stop blocks, build oversized, and never buy a hand plane--
bake
home | projects | blog
389 posts in 5133 days
#9 posted 10-21-2012 04:37 AM
GrumpyMike, Here is a link to a blog on how to use one that Mafe posted. http://lumberjocks.com/mafe/blog/18170
Also here is a link to a bunch of others. http://lumberjocks.com/projects/tag/kerfmaker/by/date/page/1
Antknee, the slots were cut on the router table with a 3/8” dado bit.
-- I love the smell of Home Depot in the morning, it smells like.......carpentry. Bake, Bar Lazy U Woodworks, Lehi,UT.
rance
home | projects | blog
4282 posts in 4616 days
#10 posted 10-22-2012 02:14 PM
bake, here are some more under the blogs.
-- Backer boards, stop blocks, build oversized, and never buy a hand plane--
Jim Jakosh
home | projects | blog
27697 posts in 4561 days
#11 posted 10-23-2012 01:35 PM
Nice kerf maker. You’ll love how simple it makes the dado cuts fit!..............Jim
-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!
DadoSutter
home | projects | blog
15 posts in 3845 days
#12 posted 09-06-2013 12:08 AM
Thank you! My choice for my first one.
Cheers
-- Dado Sutter
Have your say...