LumberJocks

Rocking Horse

  • Advertise with us
Project by Snoman42 posted 10-14-2012 12:48 PM 1325 views 0 times favorited 2 comments Add to Favorites Watch

First major project using the Scroll-Saw. A rocking horse for my daughter. Started with 1” brown maple which had a bit of birds-eye in it. #7 blade for the cutting.
Used walnut for the bridle and sectional inlays – Craftsman rotary tool and a straight-edge.

-- Spencer - NS

2 comments so far

View terry603's profile

terry603

home | projects | blog

321 posts in 3968 days

#1 posted 10-14-2012 08:44 PM

very nice,will get some use

-- may not always be right,but,never in doubt.
View Zinderin's profile

Zinderin

home | projects | blog

94 posts in 3187 days

#2 posted 10-15-2012 03:45 PM

I like the approach, it seems to be very efficient with the use of your stock, and its attractive when done. Now to go make some pattern templates … see ya!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com