All-In-One Honing Station

  • Advertise with us
Project by CodyFurnishings posted 09-20-2012 09:26 PM 2892 views 6 times favorited 4 comments Add to Favorites Watch

I found this All-In-One Honing Station in the Get Sharp-Fast article (p. 96) in Tauten Press’s The Best of Fine Woodworking Tune Up Your Tools issue by Deneb Puchalski. This is also the same honing station used in the Lie-Neilson YouTube videos. The materials I used for this project are 3/4” baltic birch ply, walnut and 3/4” inch brass screws. I also modified the honing station to fit my King 800/4000 combination grit and 6000 grit waterstones that I purchased at Rockler. I tested the system out on some newly purchased chisels and planes and it works great.

-- John Holden --

4 comments so far

View darinS's profile


719 posts in 4084 days

#1 posted 09-20-2012 09:31 PM

Looks great. I hope it serves you well for many years.

-- Rule 7 - Always be specific when you lie

View JerrySats's profile


237 posts in 4827 days

#2 posted 09-21-2012 10:44 PM

Great job on it , I’m pretty sure you can get a PDF on the LN site for theirs .

View doordude's profile


1085 posts in 4200 days

#3 posted 09-22-2012 05:22 AM

nice job i’ll have to look for that issue, to make one for me

View CodyFurnishings's profile


3 posts in 3316 days

#4 posted 09-22-2012 10:11 AM

Here is the link to the PDF for the All-In-One Honing Station (Angle Setting Jig) on the Lei-Neilson website:

-- John Holden --

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics