| Project by jerrells | posted 09-10-2012 09:49 PM | 2179 views | 1 time favorited | 4 comments |  |
 |
Found this pattern on the internet so I decided to cut it today. There were no real instructions so this is a prototype. I made it out of 1/4 baltic birch ply. and it is 6 inches acorss (at the top) and stands 3.5 inches tall. They say it is a candy dish but you see it is empty so that did not work. I will apply finish tomorrow.
Thanks for looking.
-- Just learning the craft my Lord and Savior Jesus Christ practiced.
4 comments so far
Kookaburra
home | projects | blog
748 posts in 3238 days
#1 posted 09-10-2012 10:02 PM
Hmmm . . I think the candy would fall through the gaps – how about a fruit bowl?
The ply makes such nice graceful lines here. I really like it.
Are you going to post a blog about how you did it?
-- Kay - Just a girl who loves wood.
jerrells
home | projects | blog
918 posts in 3898 days
#2 posted 09-10-2012 10:16 PM
The pattern can be found at http://www.finescrollsaw.com/order.htm. I printed it out at 80% for this cut.
-- Just learning the craft my Lord and Savior Jesus Christ practiced.
RussInMichigan
home | projects | blog
600 posts in 3794 days
#3 posted 09-11-2012 10:36 AM
jerrells,
Nice piece and thank you very much for the link.
Russ
RussInMichigan
home | projects | blog
600 posts in 3794 days
#4 posted 09-11-2012 12:01 PM
Jerrells,
In the PDF file I have the designer calls it Fruit Basket. The design has 24 bottom pieces – the four leg/feet pieces, 8 pieces that fit into the slots on Part C that the leg/feet don’t use and then 12 more pieces beyond that, for which I assume one of each is intended to go between each of the others and glue to the side of Part C. If all those pieces are put in, maybe then it will hold candy pieces!
Thanks again for the link.
Have your say...