Table Saw cabinet

  • Advertise with us
Project by Aristocraft posted 09-06-2012 06:19 PM 5368 views 5 times favorited 5 comments Add to Favorites Watch

Just finished building the two sided cabinets, back to back, next to my table saw – the top in Melanie trimmed in cedar – The Table saw is a Boice Crane, due to space limits, I installed two rollers at the back to help when cutting long stock. The table saw cabinet is made from 3/4 plywood and then covered in toung and grove cedar

-- --- Never a failure - Always a lesson

5 comments so far

View Don Broussard's profile

Don Broussard

3770 posts in 2707 days

#1 posted 09-07-2012 12:14 AM

Nice project. I like that it’s two sided and offers a bunch of storage. In the first picture, it looks like the cabinet top is higher than your TS, but in the second picture, they look like they are the same height—probably just the perspective of the photo. I favorited yours since I’m getting ideas when I build mine for my Craftsman 113 contractor saw. Thanks for posting.

-- People say I hammer like lightning. It's not that I'm fast -- it's that I never hit the same place twice!

View PaBull's profile


967 posts in 4120 days

#2 posted 09-07-2012 03:43 AM

Looks like you getting set up quite well.

Lots of storage.


-- rhykenologist and plant grower

View Aristocraft's profile


87 posts in 3036 days

#3 posted 09-07-2012 12:59 PM

Thanks – the front cabinet, i built while living in Texas, the move to Minnesota took it’s toll – I will be remaking the drawers. But yes, storage it has!!
The cabinets were a 1/4 inch higher than the table saw, so i built the floor up a 1/4 inch using plywood – now the are the same height and when cutting wide stock it come in handy! I installed a electrical outlet directly above the side cabinets so i can use the table top for other things as well….

-- --- Never a failure - Always a lesson

View Dwain's profile


596 posts in 4314 days

#4 posted 09-07-2012 05:31 PM

Nicely done. The rollers in back are also nice. You should think about putting a router table insert on the right side of your setup. Heck, it doesn’t look like it would take much. Really well done, thanks for sharing.

-- When you earnestly believe you can compensate for a lack of skill by doubling your efforts, there is no end to what you CAN'T do

View whitebeast88's profile


4128 posts in 2646 days

#5 posted 09-08-2012 12:07 AM

great job.nice looking shop there also.

-- Marty.Athens,AL

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics