Project by Mike | posted 08-07-2012 02:23 AM | 5387 views | 7 times favorited | 11 comments | ![]() |
![]() |
Here is my completed Hammer Coat rack. I left it completely unfinished and even left the pencil marks to give it a little character. The rack is made from 4 wooden handled roofing hammers and 4 tack hammers. The entire project cost around $30 or so.
PS – sorry for the grainy photo… it’s off a very old cell phone
-- look Ma! I still got all eleven of my fingers! - http://www.lepelstatcrafts.etsy.com - https://www.youtube.com/channel/UCppWfrYGXCr5lm9uW-Fpqqw
11 comments so far
cabmaker
home | projects | blog
1745 posts in 4272 days
#1 posted 08-07-2012 02:30 AM
I like it Mike ! I like it a lot.
Tom Godfrey
home | projects | blog
488 posts in 3638 days
#2 posted 08-07-2012 02:31 AM
Neat idea. I may just have to copy this for myself.
-- Tom Godfrey Landrum South Carolina ([email protected])
clieb91
home | projects | blog
4267 posts in 5398 days
#3 posted 08-07-2012 02:36 AM
Really neat idea. The perfect rack for a shop.
CtL
-- Chris L. "Don't Dream it, Be it."- PortablePastimes.com (Purveyors of Portable Fun and Fidgets)
MonteCristo
home | projects | blog
2099 posts in 3651 days
#4 posted 08-07-2012 02:42 AM
Interesting use of old hammer heads !
-- Dwight - "Free legal advice available - contact Dewey, Cheetam & Howe""
markswoodcraft
home | projects | blog
175 posts in 3583 days
#5 posted 08-07-2012 02:48 AM
would make a great gift for a fellow woodworker or somebody in construction.
Great job!
Alongiron
home | projects | blog
654 posts in 4156 days
#6 posted 08-07-2012 04:20 AM
I thought I was going to see the necks off some whiskey bottles glued to the board! Good job! I might have to get hammered too!!!!
-- Measure twice and cut once.....sneak up on it! Steve Lien
Woodwrecker
home | projects | blog
4240 posts in 5038 days
#7 posted 08-07-2012 04:21 AM
Cool idea Mike !
RKaste
home | projects | blog
144 posts in 3619 days
#8 posted 08-07-2012 01:32 PM
Now that is really creative.
-- --May you have fair winds and following seas--
whitewulf
home | projects | blog
456 posts in 4400 days
#9 posted 08-07-2012 10:46 PM
A rack with old socket chisel handles, comes to mind. I plan to re-handle my working socket chisels, because I want Matching set. Saving the originals without modification, as the rack. i can not spare any of my hammers!
-- "ButI'mMuchBetterNow"
S4S
home | projects | blog
2118 posts in 4144 days
#10 posted 08-15-2012 02:09 AM
Nice job , that is cool .
tiredandtrue
home | projects | blog
6 posts in 3234 days
#11 posted 12-12-2013 03:42 PM
great graduation gift for an engineer. May try add a golf club head and a paint brush head (if I can figure out how to stiffen the head to make a retirement rack. thanks
Have your say...