LumberJocks

Five minute kerfmaker - KM2 with a micro adjustment feature

  • Advertise with us
Project by George_SA posted 07-30-2012 07:23 PM 5669 views 5 times favorited 1 comment Add to Favorites Watch

It took me only about 5 minutes to make and it even has a micro adjuster! See my blog the 5 Minute kerfmaker - how does it work for instructions on how to use it.

  • EDIT 12 Aug. 2019 *
    Some simple instructions

1 Mark out the cut out area. It doesn’t have to be exact. Just the 1st cut line must be acurate.

2 Position on the sled for the 1st cut. Note the position of the the micro saw blade thickness adjuster screw.

3 Position for the 2nd cut. Take out the spacer and flip the kerfmaker so that the thickness of the saw blade will be compensated for with the micro saw blade thickness adjuster screw.

4. Nibbe out the waste

5 Clean up the saw kerfs with a sharp chissel

6 Perfect fit

EDIT 12 Feb 2018*
The Kerfmaker can also be used to make Box Joints. See the Easy Box joint project and the Easy Box Joints - How To blog for more details

-- Sometimes life gets in the way of one's woodworking :)





1 comment so far

View kiefer's profile

kiefer

5682 posts in 3181 days


#1 posted 07-31-2012 02:02 AM

Hey George
That is too simple but all great ideas are .
Good thinking and I will try that and see hoe it works for me .

Thanks and stay well !

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com