Cherry Music Stand

  • Advertise with us
Project by WMD2006 posted 05-09-2012 11:24 PM 2475 views 7 times favorited 4 comments Add to Favorites Watch

This is an adjustable music stand I built to try out my bench top moritiser. The base is a cherry box that has the legs attached with stopped dovetails. A removable blackwood pin sets the height and a profiled slot in the back adjusts the pitch of the stand itself.
The cap on the base was made with custom molding from my table mounted router along with a top that has a scrolled hole to accept the upper part of the stand and conceal all of the joints beneath.
It was finished with a water based gel stain. I had some concerns about the stain going on evenly between the staves on top but they came out fairly well.

-- -MDWhite

4 comments so far

View RogerM's profile


811 posts in 3849 days

#1 posted 05-09-2012 11:46 PM

WMD – I like it. It looks like the finish came out really well. It appears to be quite functional. I did a portable one a few years ago with a black walnut case to hold it.

-- Roger M, Aiken, SC

View Martyroc's profile


2712 posts in 3755 days

#2 posted 05-10-2012 12:34 AM

Great looking music stand, that cherry looks cool.

-- Martin ....always count the number of fingers you have before, and after using the saw.

View GenerationWW's profile


521 posts in 3699 days

#3 posted 05-10-2012 01:05 AM

Very nice, great job!

-- list your handcrafted treasures @ for free!

View Roger's profile


21055 posts in 4254 days

#4 posted 05-10-2012 11:17 AM

Really nice stand. Rock on.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics