Project by woodman88 | posted 03-27-2012 02:14 AM | 5140 views | 3 times favorited | 7 comments | ![]() |
![]() |
| |||||||
|
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
7 comments so far
TurnTurnTurn
home | projects | blog
614 posts in 4122 days
#1 posted 03-27-2012 02:26 AM
Beautiful work!!!! I need a new router table and this one looks great.
-- TurnTurnTurn
lizardhead
home | projects | blog
653 posts in 3854 days
#2 posted 03-27-2012 04:14 AM
Looks good enough for an interior cabinet.
-- Good, Better, Best--Never let it rest---Always make your Good be Better & your Better Best
Drunken Woodworker
home | projects | blog
70 posts in 3265 days
#3 posted 03-27-2012 05:18 AM
Very nice! Totally jealous. Were the horizontal and vertical grain patterns a conscience decision?
-- Visit my blog at http://drunkenwoodworker.com
Rick Dennington
home | projects | blog
7139 posts in 4207 days
#4 posted 03-27-2012 10:53 PM
Beautiful router table…you did a stellar job on the build…..One thing though: You need some holes in the door to take care of the make-up air inside the router compartment….The chip and dust removal will work a lot better , and give more suction to the vacumn, or dust colllector…..
-- " There's a better way.....find it"...... Thomas Edison.
woodman88
home | projects | blog
148 posts in 3661 days
#5 posted 03-28-2012 01:18 AM
Thanks Rick I mounted the hinges on the door to keep a gap around it slightly thinking that would be enough.And also the side walls are just short of the top also.I havent tried it yet so thanks I will keep that in mind
lrob
home | projects | blog
57 posts in 3706 days
#6 posted 03-29-2012 01:27 AM
Great looking work. I like all the drawers for bits and tools.
-- Remember the one with the most toys when he dies WINS!
AJswoodshop
home | projects | blog
1057 posts in 3289 days
#7 posted 05-01-2012 01:37 PM
Wow nice router table wish I had the room to make one.
AJ
Have your say...