Miter Crosscut Fence

  • Advertise with us
Project by newTim posted 03-21-2012 06:13 AM 8508 views 40 times favorited 23 comments Add to Favorites Watch

This fence uses the Kreg system and goes along with the miter bench I posted a few weeks ago. I laminated some 3/4 MDF with the same material used on the bench top and sprayed the rest of the fence black to match. I cut slots in the back support and marked their locations on the bench top using a punch. I used t-nuts to hold the bolts in place and attached the fence through the slots with knobs. All in all, pretty simple and very accurate. I just need to add the tape measure. Here’s some more pics.

-- tim hill

23 comments so far

View corydoras's profile


140 posts in 3109 days

#1 posted 03-21-2012 07:49 AM

Very neat.
That is some cool spray paint you have there.
Does it look like granite, or is it the picture playing tricks with my eyes?

Anyway, looks like a really good workstation.


-- ->Growing old is mandatory, Growing up is optional-<

View Ken90712's profile


17820 posts in 3800 days

#2 posted 03-21-2012 07:56 AM

What a great looking set up and very clean to boot. Nice job. How do you like that Miter saw Bosh came out with? I have heard a couple compliants that it doesn’t cut as square as some would like? I looked at this very closely at woodworking show in Vegas a while back.

The only thing wrong with all that storage is I would be opening all the drawers looking for something LOL

Great work.

-- Ken, "Everyday above ground is a good day!"

View HalDougherty's profile


1820 posts in 3848 days

#3 posted 03-21-2012 10:11 AM

Now that’s the way to set up a saw! It’s beautiful, but would look out of place in my organized mess.

-- Hal, Tennessee

View Lee A. Jesberger's profile

Lee A. Jesberger

6866 posts in 4591 days

#4 posted 03-21-2012 11:59 AM

Hi Tim,

That’s a great looking addition that will really speed up the process of cutting duplicate parts.


-- by Lee A. Jesberger

View stefang's profile


17039 posts in 3946 days

#5 posted 03-21-2012 12:15 PM

Wonderful and clean. Will you be setting up some dust control there?

-- Mike, an American living in Norway.

View ChrisK's profile


2043 posts in 3693 days

#6 posted 03-21-2012 12:30 PM


Nice setup. I use my miter station all the time. Thanks for the post.

-- Chris K

View 559dustdesigns's profile


633 posts in 3779 days

#7 posted 03-21-2012 01:01 PM

I just favorated the favorate or something. This thing is beautiful, nice job. Thanks newTim

-- Aaron - central California "If you haven't got the time to do it right, when will you find the time to do it over?"

View KMT's profile


603 posts in 3274 days

#8 posted 03-21-2012 03:31 PM

Thats a smart looking unit. You should get a ton of use out of it. Love the Bosch Glider, its a great saw.

-- - Martin

View a1Jim's profile


117915 posts in 4189 days

#9 posted 03-21-2012 04:01 PM

Looks show room ready ,very nice.


View Roger's profile


21030 posts in 3415 days

#10 posted 03-21-2012 06:37 PM

fine fine and fine. looks like you could have a nice smorgasborg on that beautiful counter… lol

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View cwcad's profile


17 posts in 3976 days

#11 posted 03-21-2012 06:52 PM

Wonderful setup! I have set up something akin to yours. Although I feel as if mine is of the Neanderthal variety after vierwing the pictures.

-- Do what you say...Say what you do.

View G_Bishop's profile


58 posts in 3658 days

#12 posted 03-21-2012 07:49 PM

Very Nice, I’ve been aiming on doing a similar project.

-- ---- Jack of all Trades, Master of None ----

View DocK16's profile


1186 posts in 4698 days

#13 posted 03-21-2012 09:29 PM

I went as far as purchasing the Kregg system a year ago, Maybe this will be the year I get this project done Yours might be the inspiration I need.

View doncutlip's profile


2832 posts in 4167 days

#14 posted 03-21-2012 11:21 PM

Wow that is impressive

-- Don, Royersford, PA

View spunwood's profile


1202 posts in 3447 days

#15 posted 03-22-2012 12:37 AM

Love the set up, the saw, and the colors.

-- I came, I was conquered, I was born again. ἵνα ὦσιν ἓν

showing 1 through 15 of 23 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics