Outfeed Table

  • Advertise with us
Project by WoodScrap posted 03-12-2012 12:46 AM 72317 views 113 times favorited 48 comments Add to Favorites Watch

Next shop project was an outfeed table. This should have been my first major shop project now that I have experienced the benefit of having one versus roller stands and creative juggling of long boards. It is 4×8 and has 20 drawers with adjustable dividers. The center sections on each side are shelved for storing my miter sleds and other table saw jigs. Following the theme in my shop it is red oak and has a replaceable hardboard top. I ran my dust collection hose thru the middle of the bench from the table saw to my drum sander at the other end.

And yes, before anyone asks, I cleaned the shop before taking the photos. I do that after every major build, whether it needs it or not. It always needs it.

Again, thanks for looking.

-- Rick -Tulsa

48 comments so far

View twokidsnosleep's profile


1130 posts in 3785 days

#1 posted 03-12-2012 01:04 AM

Great table and awesome shop space!!

-- Scott "Some days you are the big dog, some days you are the fire hydrant"

View Dusty56's profile


11859 posts in 4499 days

#2 posted 03-12-2012 01:13 AM

Just a wee bit jealous of the awesome workspace and that perfect outfeed table you made : )

-- I'm absolutely positive that I couldn't be more uncertain!

View electricalD's profile


116 posts in 3920 days

#3 posted 03-12-2012 01:15 AM

Hey Rick, that is a very tidy shop you have. How do you rate your Grizzly gear. I am just in the electrical phase of my shop (almost done) and am considering Grizzly too.

Dan P.

-- If there were no God, there would be no atheists, G. K. Chesterton

View Martyroc's profile


2712 posts in 3117 days

#4 posted 03-12-2012 01:26 AM

Great setup, nice looking shop.

-- Martin ....always count the number of fingers you have before, and after using the saw.

View DIYaholic's profile


19921 posts in 3486 days

#5 posted 03-12-2012 01:28 AM

I would never be able to work in your shop. I would either get lost or be to afraid of scratching you beatiful table!!!

You have an awesome shop!

-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?

View Timthemailman's profile


333 posts in 3587 days

#6 posted 03-12-2012 01:36 AM

That is really nice. Have fun, should make life in the shop a lot easier.

View Kelen's profile


270 posts in 3203 days

#7 posted 03-12-2012 01:37 AM

1) great looking outfeed table, and 2) I’m jealous at how clean your shop is.

View NormG's profile


6506 posts in 3815 days

#8 posted 03-12-2012 04:11 AM

Great out-feed table. What are you going to do about the out-feed side of the sander

-- Norman - I never never make a mistake, I just change the design.

View KMT's profile


603 posts in 3473 days

#9 posted 03-12-2012 04:49 AM

Jaw dropping, wow! Greeeat Shop.

-- - Martin

View redryder's profile


2393 posts in 3913 days

#10 posted 03-12-2012 06:46 AM

Great work table/outfeed. You need to update your workshop page….............

-- mike...............

View rotorwash's profile


20 posts in 3492 days

#11 posted 03-12-2012 07:23 AM

How does anyone have a shop that clean!. Nice outfeed table Rick.

-- Jon, California

View jeff's profile


1234 posts in 4276 days

#12 posted 03-12-2012 08:14 AM

super awesome projects and shop :)

-- Jeff,Tucson,Az.

View Toninho's profile


190 posts in 3639 days

#13 posted 03-12-2012 08:28 AM

A dream shop! When I grow up I want a store like this! lol Lunch every day at his table!

-- António Guerreiro

View Lildrgnoflb01's profile


11 posts in 3823 days

#14 posted 03-12-2012 09:23 AM

Are you trying to make the rest of us woodworkers look bad? Such a clean shop is straight out of a magazine… impressive!

View Mojo1's profile


286 posts in 3501 days

#15 posted 03-12-2012 11:27 AM

Beautiful shop you have!

showing 1 through 15 of 48 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics