Cutting Board

  • Advertise with us
Project by CheyJ posted 03-05-2012 02:49 PM 831 views 0 times favorited 2 comments Add to Favorites Watch

I first had to find all the kinds of wood i was using for my project. Then I had to messure then to size. Once to the correct length and width I glued all the pieces together side to side. Once dry, i cut it into 1in strips sideways from what I glued them together. Next I had to glue the strips together by flipping everyother one. Once dry I chzzled all the extra glue off and started to hand it and make sure all the sides were level. Once done with my project i put 8 coats of mineral oil.

2 comments so far

View Kevin's profile


562 posts in 2598 days

#1 posted 03-06-2012 12:05 AM

Looks good, nice choice of woods.

-- Measure twice, cut once, then sand a whole bunch

View Martyroc's profile


2712 posts in 2604 days

#2 posted 03-06-2012 12:17 AM

Great choice of wood, board looks really good.

-- Martin ....always count the number of fingers you have before, and after using the saw.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics