Double Action Hinges

  • Advertise with us
Project by Joshuah posted 02-17-2012 06:57 AM 34881 views 29 times favorited 13 comments Add to Favorites Watch

I have been working on this style of hinge, attempting to get it as good as I can. These will have to work for now.
I made a tutorial on how I tempted them…HERE

-- -Joshuah

13 comments so far

View redryder's profile


2393 posts in 3639 days

#1 posted 02-17-2012 09:25 AM

These are styln’. Your tutorial has some good photos to follow along. Thanks…............

-- mike...............

View Hallmark's profile


432 posts in 3643 days

#2 posted 02-17-2012 09:50 AM

Really nice work, not an easy task to get it right. Go Zags!!!!

-- Style is simple, but not my execution of it.

View StumpyNubs's profile


7778 posts in 3337 days

#3 posted 02-17-2012 12:23 PM

I really like wooden hinges! Thanks for posting!

-Jim; aka “Stumpy Nubs”
Blue Collar Woodworking? That show changed my life! ”- The Hampton Roadie

-- Subscribe to "Stumpy Nubs Woodworking Journal"- One of the crafts' most unique publications:

View jaykaypur's profile


4017 posts in 2945 days

#4 posted 02-17-2012 12:40 PM

Very nice work.

-- Use it up, Wear it out --------------- Make it do, Or do without!

View Helkat's profile


74 posts in 2833 days

#5 posted 02-17-2012 01:21 PM

Cool looking hinges. The tutorial was well done, too. Now I’m trying to think of what I could add those hinges to.. :)

-- Nat, UPstate NY,

View Gabe C.'s profile

Gabe C.

288 posts in 2878 days

#6 posted 02-17-2012 02:21 PM

That’s really cool! I’m going to have to incorporate that technique into a future project. Thanks for posting this and the tutorial!

-- If I could just get this whole "Time/Money" problem figured out...

View Gabe C.'s profile

Gabe C.

288 posts in 2878 days

#7 posted 02-17-2012 05:03 PM

Came back to check it out again, and I had a question. At any point is the dowel glued, or is it just snug in there through the whole length?

-- If I could just get this whole "Time/Money" problem figured out...

View Dennisgrosen's profile


10880 posts in 3652 days

#8 posted 02-17-2012 07:25 PM

looking good
thanks for sharing


View rdjack21's profile


268 posts in 3464 days

#9 posted 02-17-2012 08:56 PM

I just love wood hinges and these look really nice. I have really got to take the time and learn the process of making these myself.

-- --- Richard Jackson

View SuburbanDon's profile


487 posts in 3531 days

#10 posted 02-17-2012 09:13 PM


-- --- Measure twice, mis-cut, start over, repeat ---

View Joshuah's profile


152 posts in 3230 days

#11 posted 02-17-2012 11:51 PM

Gabe C. It is a little difficult to glue these, but I rub glue on the end that will go in the hinge last and on the opposite inside of the hinge. It is not the strongest glue job, but for these I don’t believe it needs to be.

-- -Joshuah

View gfadvm's profile


14940 posts in 3227 days

#12 posted 02-18-2012 01:59 AM

Joshuah, You knew I would weigh in here as I’m addicted to wooden hinges and these are very cool. Now I’m off to favorite the build blog. Thanks for posting these.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View NormG's profile


6493 posts in 3541 days

#13 posted 02-18-2012 05:30 AM

Wonderful hinge

-- Norman - I never never make a mistake, I just change the design.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics