Miter/Crosscut Bench

  • Advertise with us
Project by newTim posted 02-13-2012 03:33 AM 24637 views 75 times favorited 29 comments Add to Favorites Watch

It feels good to be back in the shop. I didn’t know how versatile these saws were until I finally got one and the new Bosch is a joy to work. It sure makes breaking down panels alot quicker as you can take a 24” wide sheet and flip it over to finish the cut. I plan to add a fence later on.

You can never have to many clamps and you can’t have to much storage. All the drawers are 22” full extension and there’s a full extension shelf for the spindle sander. The bench matches the other cabinets with the same plastic laminate. The next project will be a rolling shop cabinet for the planer and then a combination router, assembly, and sheet cutting table. Stay tuned.

-- tim hill

29 comments so far

View a1Jim's profile


118297 posts in 4865 days

#1 posted 02-13-2012 03:36 AM

Wow that’s a great chop station good job.


View Kayvon's profile


89 posts in 3594 days

#2 posted 02-13-2012 03:38 AM

Very nice build. I LIKE it!! A station like that is going on my list of things to do.

-- Kayvon

View Bobsboxes's profile


1673 posts in 3952 days

#3 posted 02-13-2012 03:48 AM

That is super, everything in its place. I also have alot of drawers.

-- Bob in Montana. Kindness is the Language the blind can see and deaf can hear. - Mark Twain

View degoose's profile


7285 posts in 4643 days

#4 posted 02-13-2012 03:50 AM

That is one flash station…. excellent…

-- Be safe.

View redryder's profile


2393 posts in 4390 days

#5 posted 02-13-2012 06:11 AM

Full extension drawers are the way to go. You must have a few bucks in this project. Nice upgrade to the shop…................

-- mike...............

View newTim's profile


625 posts in 4895 days

#6 posted 02-13-2012 07:00 AM

The laminate was from a $10 blemished 5’x10’ sheet, the rest is plywood with iron on edge banding. The drawer slides were around $8 apiece (I think) in a pack of 10. Then there’s the saw…

-- tim hill

View James Lango's profile

James Lango

186 posts in 4822 days

#7 posted 02-13-2012 08:19 AM

very sweet! Nice job..

-- [email protected]

View JohnMeeley's profile


255 posts in 3621 days

#8 posted 02-13-2012 08:32 AM

Huge, It’ll take a day or two to remember what drawer has what. Nice setup.

-- "The greatest pleasure in life is doing what others say you cannot do."-Walter Bagehot

View michelletwo's profile


2795 posts in 4304 days

#9 posted 02-13-2012 11:35 AM

Am I jealous, or what?

View T. D. Reid's profile

T. D. Reid

275 posts in 3633 days

#10 posted 02-13-2012 11:47 AM

Nice job sir! I’m sure you will enjoy it. Cheers

-- Head to the shop its calling you – Todd

View Josh's profile


36 posts in 3584 days

#11 posted 02-13-2012 12:49 PM

Awesome! I am in the process of designing something similar for my garage. I have a Dewalt 12” double bevel, sliding miter saw…plan to do a recessed table similar to yours that is 28” deep, 34” tall to match a sawstop table saw that is coming soon, and 22 feet wide to fill the depth of my garage.

I have never built anything with drawers though so I’m not quite sure how to do that yet…

-- Josh, Columbus, GA

View Roger's profile


21055 posts in 4092 days

#12 posted 02-13-2012 01:22 PM

this is a seriously awesome miter station. wow. plenty of storage. nice build

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View jerrells's profile


918 posts in 4173 days

#13 posted 02-13-2012 02:47 PM

ONE very nice saw station – I loke it.

-- Just learning the craft my Lord and Savior Jesus Christ practiced.

View BTKS's profile


1989 posts in 4752 days

#14 posted 02-13-2012 05:12 PM

Incredible. Lots of work for lots of reward!

-- "Man's ingenuity has outrun his intelligence" (Joseph Wood Krutch)

View BarbS's profile


2434 posts in 5373 days

#15 posted 02-13-2012 05:13 PM

Whoa… so classy! I’ll bet you like walking into the room and just Seeing that work station! Nice work!


showing 1 through 15 of 29 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics