Drill Press top

  • Advertise with us
Project by Jerry posted 02-10-2012 04:06 PM 3400 views 27 times favorited 12 comments Add to Favorites Watch

Recently re-did my drill press top, may make a few modifications as I see what else I need.

-- We are all one decision away from stupid.

12 comments so far

View joshtank's profile


224 posts in 3453 days

#1 posted 02-10-2012 04:13 PM

jealous. that is awesome. i know at some point it’d want something like this. first to get a ‘real’ drill press.

-- Josh - Jacksonville, FL -

View Jamie Speirs's profile

Jamie Speirs

4168 posts in 3336 days

#2 posted 02-10-2012 04:27 PM

Very nice.
Good size as well.
I could do with doing the same.

-- Who is the happiest of men? He who values the merits of others, and in their pleasure takes joy, even as though 'twere his own. --Johann Wolfgang von Goethe

View BarbS's profile


2434 posts in 4565 days

#3 posted 02-10-2012 04:41 PM

Super-fancy drill press table! That will be your pride and joy for many years, I think. Very nice looking shop, too.


View JohnMeeley's profile


255 posts in 2813 days

#4 posted 02-10-2012 08:58 PM

Great use of space underneath. Looks nice.

-- "The greatest pleasure in life is doing what others say you cannot do."-Walter Bagehot

View doncutlip's profile


2832 posts in 4036 days

#5 posted 02-10-2012 10:05 PM

Great looking drill press table

-- Don, Royersford, PA

View redryder's profile


2393 posts in 3581 days

#6 posted 02-10-2012 10:57 PM

The under table storage has to be handy…..........

-- mike...............

View cutmantom's profile


407 posts in 3515 days

#7 posted 02-10-2012 11:08 PM

how did you deal with the elevation handle clearance

View Martyroc's profile


2712 posts in 2786 days

#8 posted 02-10-2012 11:20 PM

Now that’s a drill press tabletop! Very nice I will need to steal this design.

-- Martin ....always count the number of fingers you have before, and after using the saw.

View jeff's profile


1154 posts in 3945 days

#9 posted 02-11-2012 04:05 AM

nice job and good looking drill press table.

-- Jeff,Tucson,Az.

View Vrtigo1's profile


434 posts in 3471 days

#10 posted 02-11-2012 04:06 AM

Every time I use my drill press I tell myself I need to make a table for it so I don’t have to rely on the tiny one it came with. I will definitely bookmark this project for inspiration when I finally get around to building one!

View Ken90712's profile


17707 posts in 3668 days

#11 posted 02-11-2012 02:38 PM

Nice work looks great and functional!

-- Ken, "Everyday above ground is a good day!"

View Jerry's profile


70 posts in 3126 days

#12 posted 02-12-2012 05:57 PM

The elevation handle challange is delt with by being able to flip the fencr do that the shorter bottom side becomes the upright side and the higher upright side becomes the bottom side, just drilled two holes in each side so I could change it. See pic

This was taken before I finished the project.

-- We are all one decision away from stupid.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics