boiler room door

  • Advertise with us
Project by jjempson posted 12-31-2011 08:13 PM 2013 views 0 times favorited 2 comments Add to Favorites Watch

a sturdy door was required for this so over the top i happily went…jambs and top rail are 120mm x 50mm…mid and bottom rail are 220mm..
joints are a combination of haunch mortise and tenon and bare faced tenon…all wedged and poly glued.. the panel is 18mm w.b.p ply…groves routed to give a t&g appearance.also extra vent holes..fixed into a rebate 18mm x35mm rebate and glued and screwed within a inch of its life…..also a chunky frame was made and fitted to complete the project.

-- jjempson

2 comments so far

View a1Jim's profile


118161 posts in 4628 days

#1 posted 01-01-2012 05:55 AM

It sure looks sturdy nice work


View jjempson's profile


200 posts in 4039 days

#2 posted 01-01-2012 12:26 PM

thank you good sir.

-- jjempson

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics