Coin Display

  • Advertise with us
Project by Snaggletooof posted 12-30-2011 08:55 AM 3277 views 2 times favorited 4 comments Add to Favorites Watch

I made this a while back for a co-worker. This was the first time I used pocket screws. I utilized them from my recollection on only the top and bottom coin planks. The rabbet on each plank was 1/4” I think. This was also the first project I used a router on. Obviously on the top and bottom edges, but I also put a cove on each coin plank.

4 comments so far

View Ken90712's profile


18083 posts in 4481 days

#1 posted 12-30-2011 11:28 AM

Nice looking display.

-- Ken, "Everyday above ground is a good day!"

View Woodbutcher3's profile


463 posts in 4178 days

#2 posted 12-30-2011 02:23 PM

From the projects you have put up, I would think you’ve been woodworking for a long time. Your skills are developing very fast. Another nice project. Once again, you decription has given me some ideas. Keep it up!

-- Rod ~ There's never enough time to finish a project, but there's always time to start another one.

View a1Jim's profile


118297 posts in 4869 days

#3 posted 12-30-2011 04:11 PM

Looks good ,pocket screws speed things up.


View JohnnyClem's profile


34 posts in 3655 days

#4 posted 01-01-2012 03:58 PM

Great work again. I enjoy seeing all of your projects.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics