Duck house

  • Advertise with us
Project by jjempson posted 12-29-2011 11:41 PM 1890 views 1 time favorited 1 comment Add to Favorites Watch

a simple duck house that went a bit posh…
main internal construction is W.B.P ply..all glued and screwed together.the cladding was made from regularized studding timber ..(72mm x 42mm) ..ripped in half to give me a size of 75×18…i made a jig for the thicknesser which had a angled bed..this gave me a nice taper…a rebate was carefully machined with a old wadkin spindle moulder so they cladding would overlap for weathering…windows are covered with perspex and a upper bedding area was also fitted with a gentle sloped ramp….the run was made from the same construction timber …simple lap joints with glue and screws..chicken wire fitted upon delivery to client… PS message from occupants…Quack Quack Quack

-- jjempson

1 comment so far

View Jim Jakosh's profile

Jim Jakosh

26062 posts in 4159 days

#1 posted 12-30-2011 03:30 AM

That is a fancy duck house! It must be for a presidential duck!!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics