Project by MyChipCarving | posted 12-26-2011 08:03 PM | 3776 views | 0 times favorited | 10 comments | ![]() |
![]() |
The cube in a cube idea came from American Woodworker.
The inner cube is free floating and will not come out through the holes.
I added some chip carving to the inner cube.
I think it will make a fun conversation piece.
-- Marty, https://www.MyChipCarving.com, 866-444-6996
10 comments so far
WannaBBetter
home | projects | blog
80 posts in 3814 days
#1 posted 12-26-2011 08:24 PM
nicely done did you carve before or after you knocked the center cube out
-- I cut it three times and it's still too short
MyChipCarving
home | projects | blog
658 posts in 4137 days
#2 posted 12-26-2011 08:28 PM
Hey WannaB,
I carved the cube before cutting the corners to free the inner cube.
That made it much more stable and easier to carve rather than trying to support it when it was loose.
It was a fun one!
-- Marty, https://www.MyChipCarving.com, 866-444-6996
deon
home | projects | blog
2522 posts in 4038 days
#3 posted 12-26-2011 08:45 PM
Great work!
-- Dreaming patterns
a1Jim
home | projects | blog
118161 posts in 4589 days
#4 posted 12-26-2011 11:21 PM
Very cool,well done.
-- https://www.artisticwoodstudio.com/videos
Woodbutcher3
home | projects | blog
462 posts in 3899 days
#5 posted 12-27-2011 12:27 AM
Nice piece – inspiring!
-- Rod ~ There's never enough time to finish a project, but there's always time to start another one.
derosa
home | projects | blog
1597 posts in 3848 days
#6 posted 12-27-2011 12:36 AM
That’s some really nice work
-- A posse ad esse
Roger
home | projects | blog
21051 posts in 3816 days
#7 posted 12-27-2011 02:26 AM
that’s awesome Marty. u r thee chip carving king
-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]
leanne
home | projects | blog
45 posts in 3424 days
#8 posted 12-27-2011 03:50 AM
amazing love the chip carving it just finishes the piece.
-- Leanne, Australia, http://www.sawdustartonline.com
chilimac
home | projects | blog
29 posts in 3910 days
#9 posted 01-03-2012 05:23 PM
I like how the chip carving disguises the holes left by drilling out the holes in the large cube. Nice work.
-- Big discoveries don't go "Eureka!", they go "Huh. That's funny..." They just as frequently go *bang* and *woosh*...
Colin
home | projects | blog
246 posts in 4933 days
#10 posted 01-12-2012 02:47 PM
yes, very nice, well done
-- Colin, Aberdeenshire, Scotland. "Every craftsman was once an amateur"
Have your say...