TV corner cabinet

  • Advertise with us
Project by Greedo posted 11-09-2011 11:46 PM 5227 views 8 times favorited 9 comments Add to Favorites Watch

Second part of a commission including a dining table in the same style, modern corner cabinet for a TV with open storage underneath for dvd players and such. It is not a perfect triangle as they wanted it to face more to the left, which complicated the whole thing.
Made with solid french oak, some parts are veneered mdf, finished with 3 coats of mat water based polyurethane

9 comments so far

View doncutlip's profile


2832 posts in 4712 days

#1 posted 11-10-2011 01:21 AM

good job on the doors and sizing for the opening

-- Don, Royersford, PA

View ndwoody's profile


11 posts in 3580 days

#2 posted 11-10-2011 03:58 AM

nice project !

View FunkadelicAlex's profile


147 posts in 3847 days

#3 posted 11-10-2011 05:12 AM

I want to build a corner cabinet to hide my trashcan in the kitchen. This project is a good motivator for me. Great job on your work. I will refer back to this project when I start building the corner cabinet of my own.

-- Alex -- "I will one day write something intelligent, witty, or humorous here"

View jeff's profile


1320 posts in 4620 days

#4 posted 11-10-2011 05:44 AM

that looks nice…good use of corner space…

-- Jeff,Tucson,Az.

View Moron's profile


5048 posts in 5049 days

#5 posted 11-10-2011 06:33 AM

the only, and the one and only reason to take a commission, is for one rule


I assume, by the shape of the corner cabinet, that the TV will sit where ?

I c a “sag” factor coming to HD/TV/OWNER of said “commission” regardless of where the TV sits

just a teeny weeny sag, and those wide doors, will rub something

jus sayn cheers : )

-- "Good artists borrow, great artists steal”…..Picasso

View Moron's profile


5048 posts in 5049 days

#6 posted 11-10-2011 06:50 AM

put a bearing wall right up the middle of that cabinet span, the big ass thin spot (without a bearing wall) that the TV sits above and on…………….needs internal support, even if the TV doesn’t sit on it and is suspended above…

and do me a favour

dont &^%$ up again lol

-- "Good artists borrow, great artists steal”…..Picasso

View Greedo's profile


473 posts in 4116 days

#7 posted 11-10-2011 09:17 AM

Moron, it’s for a modern flat screen TV, not even a big one. If it were for an old heavy ass tube TV then i would have reinforced it. But in this case there is no way it can sag, the inside isn’t as deep as it looks. The base of the TV will rest above the rear cabinet wall.
And i took care of counter sagging the doors, the slightly “sag” upwards now. They have room to sag if they wanted to but i doubt it because they are very light and the hinges are over sized.

View Ken90712's profile


18048 posts in 4344 days

#8 posted 11-10-2011 12:34 PM

Good looking cabinet you have made.

-- Ken, "Everyday above ground is a good day!"

View JoeinDE's profile


450 posts in 4479 days

#9 posted 11-10-2011 09:54 PM

Nicely done. I contemplated a similar design before making my TV stand two years ago. Did the customer not want any finish on the piece?


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics