Lathe Stand

  • Advertise with us
Project by Wellsw posted 10-08-2011 09:30 PM 5799 views 5 times favorited 9 comments Add to Favorites Watch

I had a brand new lathe and some MDF i wanted out of my shop. torsion box construction in the top and legs
legs are filled with sand for added stability. I finished it with Hammered metal paint applied with a rolled. Pretty happy with it except I wish I would have sprung for some real drawer slides.

9 comments so far

View mikema's profile


180 posts in 3643 days

#1 posted 10-08-2011 09:58 PM

Well done! I bought that same Lathe this past weekend at WIA, and really like it. I may have to take some notes from yours when I go to build a stand for mine. Good job!

-- Mike ---- Visit my woodworking blog:

View flwoodhacker's profile


58 posts in 3983 days

#2 posted 10-08-2011 11:22 PM

Nice stand. Just one more thing on my “to-build” list

View Eagle1's profile


2066 posts in 4122 days

#3 posted 10-08-2011 11:45 PM

Great looking stand. I like the finish you used.

-- Tim, Missouri ....Inside every older person is a younger person wondering what the heck happened

View WilsonCreations's profile


105 posts in 3588 days

#4 posted 10-08-2011 11:45 PM

I like the sand in the legs—out of sight.

-- Wilson

View Beginningwoodworker's profile


13345 posts in 4730 days

#5 posted 10-08-2011 11:54 PM

Beautiful lathe stand.

View Craig Havran's profile

Craig Havran

346 posts in 3669 days

#6 posted 10-10-2011 05:47 PM

Wow… Congratulations… Your lathe stand is about to be copied and poorly duplicated!!! Any suggestions or things you learned during the process you care to share?

-- "There's plenty of time to read the instruction manual when you're laying in the hospital bed". - Dad

View GodofBiscuits's profile


97 posts in 4132 days

#7 posted 10-10-2011 09:49 PM

Wow! That puts my lathe stand to absolute shame! great work and don’t be too surprised if I post something similar in the not too distant future. ;o)

-- Are you going to use that piece of scrap?

View David Grimes's profile

David Grimes

2080 posts in 3697 days

#8 posted 10-11-2011 04:12 PM

Nice job.

-- If you're going to stir the pot, think BIG spoon or SMALL boat paddle. David Grimes, Georgia

View concretepicture's profile


8 posts in 3456 days

#9 posted 10-31-2011 10:27 PM

Very slick. I am looking into making a table for my lathe and you have given me a bit more to think about.


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics