wall paneling

  • Advertise with us
Project by vinceuk posted 09-22-2011 04:24 PM 1468 views 4 times favorited 4 comments Add to Favorites Watch

Wall paneling. Ok i admit the way i’ve done this is not quite right but it was a last minuet change of plan originally the panels where going to be flat. but it just looked wrong so the raised panels where added with flexible panel adhesive and brads? hopefully it should be ok but it did give me the excuse to up grade my router table from a pice of ply with a hole in it to a proper router insert and to buy the big scary panel raising bit. Anyway you know when you say “yes of corse dear i can do wood paneling for the study” then make it up as you go along well i started by fixing ply to the wall followed by 6”x1” framing with a beading on the inside followed by a dado rail at the top then came the panels i glued up the panels and then had a local joiners shop run them through there 24” thickneser and did a 7 pass round on every panel on the router table then lots of sanding. i decided to spray finnish them. used a dark stain followed by an acrylic vanish top coat

4 comments so far

View Jonathan's profile


2609 posts in 3782 days

#1 posted 09-22-2011 04:34 PM

Looks like it turned out well from the pictures you’ve provided us with. And if your wife is happy, that’s the important part.

I’m guessing this design goes better with the feel of the house.

Thanks for posting the progress pictures too. I always finding it interesting to see the progression of a project.

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View Beginningwoodworker's profile


13345 posts in 4405 days

#2 posted 09-22-2011 04:53 PM

I like your design, the wall paneling came out nice.

View terry603's profile


321 posts in 3645 days

#3 posted 09-23-2011 02:50 AM

well. i would say you proved you can…nice

-- may not always be right,but,never in doubt.

View paplou's profile


324 posts in 4076 days

#4 posted 09-25-2011 03:00 AM

yes the raised panels look much better. turned out great.


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics