| Project by rmac | posted 04-13-2011 09:06 AM | 6518 views | 11 times favorited | 10 comments |  |
 |
This is an outfeed table that I made to work with my generic Taiwanese 14” bandsaw. The leg folds up out of the way for storage. The length of the leg is also adjustable so the table will work with other tools. At one time I used it with a radial arm saw as well as the bandsaw.
There are a few more pictures showing some of the construction details on my blog.
—Russ
-- My table saw laughs at hot dogs. http://thesorteddetails.blogspot.com/
10 comments so far
Splinterman
home | projects | blog
23074 posts in 4333 days
#1 posted 04-13-2011 10:29 AM
Hey Russ,
Cool universal out-feed table…good job.
a1Jim
home | projects | blog
118153 posts in 4548 days
#2 posted 04-13-2011 04:52 PM
Good job another one for my list.
-- https://www.artisticwoodstudio.com/videos
redryder
home | projects | blog
2393 posts in 4073 days
#3 posted 04-13-2011 08:32 PM
The wife can iron on it too….....
-- mike...............
WayneC
home | projects | blog
14359 posts in 5069 days
#4 posted 04-13-2011 08:36 PM
Very nice.
-- We must guard our enthusiasm as we would our life - James Krenov
rmac
home | projects | blog
235 posts in 4032 days
#5 posted 04-14-2011 02:46 AM
@Mr. Ryder: You’re right! I never thought of that. LOL.
—Russ
-- My table saw laughs at hot dogs. http://thesorteddetails.blogspot.com/
gfadvm
home | projects | blog
14940 posts in 3661 days
#6 posted 04-14-2011 03:44 AM
Nice job BUT you need a miter slot so you can run a log sled across it.
-- " I'll try to be nicer, if you'll try to be smarter" gfadvm
rmac
home | projects | blog
235 posts in 4032 days
#7 posted 04-14-2011 06:42 AM
@gfadvm: Sure enough. And then I’d need an infeed table, too! I bet it would look a lot like the outfeed table.
—Russ
-- My table saw laughs at hot dogs. http://thesorteddetails.blogspot.com/
gfadvm
home | projects | blog
14940 posts in 3661 days
#8 posted 04-15-2011 03:15 AM
No,aroller stand works for an infeed table.
-- " I'll try to be nicer, if you'll try to be smarter" gfadvm
NormG
home | projects | blog
6508 posts in 3975 days
#9 posted 04-16-2011 11:00 PM
Multi purpose idea/use has been very good to you
-- Norman - I never never make a mistake, I just change the design.
steliart
home | projects | blog
2895 posts in 3660 days
#10 posted 04-17-2011 09:44 AM
simple and functional !!!
-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions !!!
Have your say...