| Project by Time2beupinAZ | posted 04-05-2011 01:43 PM | 2635 views | 11 times favorited | 6 comments |  |
 |
After seeing so many people make IPod holders I decided I needed one for my phone. This has come in very handy for me while I’m using some of the apps on this phone. It is made of scrap oak stained and finished with a spray lacquer. I can reposition this so it is vertical or horizontal. It has opening for the speaker on the back, and for the power plug and volume control. The only thing I would change would be the locking nut and mount on the bottom. It serves its purpose well though. Hope you enjoy and thank you for looking.
-- Tim - I usally measure twice after I cut......then I know for sure that I cut it short.....
6 comments so far
Jimthecarver
home | projects | blog
1124 posts in 4750 days
#1 posted 04-05-2011 02:03 PM
I really like the Atrix and have been thinking of making a docking station as well. The one they sell is $50 plus shipping and it is plastic junk.
Nice job thanks for posting.
-- Can't never could do anything, to try is to advance.
Kenny Blackburn
home | projects | blog
35 posts in 3593 days
#2 posted 04-05-2011 02:23 PM
That is awesome! Nice job! I am gonna have to make me one now. That would be good for the vehicle when using the GPS. Thanks for posting!
AmandasHusband
home | projects | blog
58 posts in 3657 days
#3 posted 04-05-2011 02:59 PM
Must . . . kill . . . birds!
Nice holder btw.
-- In this world there's two kinds of people my friend. Those with loaded guns and those who dig. You dig.
Paulo in Texas
home | projects | blog
131 posts in 3653 days
#4 posted 04-05-2011 03:48 PM
I think I’ll borrow this idea for my Evo.
RexMcKinnon
home | projects | blog
2593 posts in 4159 days
#5 posted 04-05-2011 04:40 PM
Nice, I like the fact that it rotates.
-- If all you have is a hammer, everything looks like a nail!
Woodwrecker
home | projects | blog
4240 posts in 4540 days
#6 posted 04-05-2011 06:32 PM
Another project for my “to do” list.
I better get going.
Nice work!
Have your say...