LumberJocks Woodworking Forum banner

Project Information

This was actually my first attempt at a desk. My sister found it in the trash, All I used from the original desk was the ceramic inserts I put into the legs. The grey top was the original which was why I went with the "Shabby Chic "(sp) look. It was MDF and I did not like it so I put a top on it from another project I did. The top is Ash that I cut into 1" x 1"'s for a "Butcher Block" look.

Gallery

Comments

· Registered
Joined
·
11 Posts
Very classy - simple elegance. The ceramic inserts really set this off.
Maybe the edge coving on the origianl piece might have been retained.
Could still do it - think about it.
 
Top