Pressure Treated Pine fence

  • Advertise with us
Project by woodman1962 posted 03-13-2011 08:50 PM 1803 views 0 times favorited 1 comment Add to Favorites Watch

This is a fence that i built in the Historic part of town.The homeowner designed the fence and i took on the process of building it.It was one of the most time consuming fences that i had built up until that time.The Gate and the posts around it are 6×6 and the rest were made of 4×4.The rails were made of 1×4 for the 2 top rails and a 1×6 for the bottom rail.The pickets were made of 2×2 We cut blocks to fill in the spaces between all the rails and pickets.The left the fence to turn and looked old i could not convince them into putting any
kind of sealer to preserve it.

-- [email protected]

1 comment so far

View Napoleon's profile


788 posts in 3869 days

#1 posted 03-14-2011 10:34 PM

What a cool fence,i really like the curve is turned down on the “door” instead of up.

Well done :)

-- Boatbuilder&blacksmith

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics