• Advertise with us
Project by canadianwoodtick posted 02-10-2011 06:31 PM 3742 views 8 times favorited 8 comments Add to Favorites Watch

First I want to thank my wife for all her help, also hallmark for his ideas, also darrell peart for his book. I made the cabinet of oak with walnut pegs. Finish was general medium brown dye, then varathane teak wipe on gel stain, then wipe on general arm a seal oil based. You guys and gals rant and rave about general products, so I drove hundreds of miles and got some arm a seal and I am very impressed. I also had a hard time finding hinges that would open 270 degrees. Also in the process of making a greene and greene billiard cue rack.

8 comments so far

View sgtq's profile


370 posts in 3183 days

#1 posted 02-10-2011 06:51 PM

Really pretty, I love the top.

-- There is nothing wrong with America that cannot be cured by what is right with America. ~William J. Clinton

View Bertha's profile


13567 posts in 3200 days

#2 posted 02-10-2011 06:55 PM

Very stately. Beatiful tone.

-- My dad and I built a 65 chev pick up.I killed trannys in that thing for some reason-Hog

View tenontim's profile


2131 posts in 4252 days

#3 posted 02-10-2011 06:58 PM

Very nice design and execution. I don’t think I would let any amateur dart thrower use this board, and only sober pro’s. Thanks for the post.

View Brandon's profile


4152 posts in 3459 days

#4 posted 02-10-2011 07:51 PM

Wow! I never thought a dartboard cabinet could look so nice! As Tim says, keep all novice dart throwers away from this.

Can you tell us a little about the wings(?) on the top of the cabinet?

-- "hold fast to that which is good"

View steliart's profile


2895 posts in 3195 days

#5 posted 02-11-2011 11:43 AM

I am not into darts, but the cabinet is very nice


-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions !!!

View RexMcKinnon's profile


2593 posts in 3703 days

#6 posted 02-11-2011 05:36 PM

Well if this was in my house I would put a sign above it and it would read. (If you value your life don’t miss!)

-- If all you have is a hammer, everything looks like a nail!

View canadianwoodtick's profile


38 posts in 3444 days

#7 posted 02-11-2011 11:15 PM

Thanks for all the wonderful comments. Brandon, to make the top; I glued two pieces of 3/4 in oak together, the bottom piece longer than the sides of the cabinet. I did not put any glue on the centre 12 inches so I could remove the centre section cut at 22 degrees later, and then replacing the centre section with another piece of material, recessing from the front. The top piece of oak is about 12 inches longer than the centre cut out, cut at 30 degrees. I nibbled on the table saw to remove material, down to 3/8 of an inch. to make the wings then hand sanded. The ends of the wings are of purple heart, 1 1/4×1 1/12×6 in. with a 1/2 dado to fit on the wings and a 1/4 inch cap on the end of the purple heart to hide the dado cut. GREG

View mrg's profile


860 posts in 3507 days

#8 posted 02-19-2011 02:49 AM

Very nice dart board cabinet.

-- mrg

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics