LumberJocks Woodworking Forum banner

Project Information

Simple cutting board made of maple with paduk strips with center strip of cherry. I was trying out a template I had for a simple cutting board, only thing that didn't go to plan was the center hole in the handle couldn't be done on the router table. I tried it with another cutting board and the bit I was using tore a chunk out which thankfully I could retrieve and re-glue in. This one meant more time with the coping saw and some rasps before hitting the spindle sander.

Sanded to 180 grit then spritzed with water to raise the grain. Then sanded to 400grit followed by 2 coats of walrus oil board oil applied about 24 hours apart and then a coat of walrus oil board wax a few days later.

Gallery

Comments

· Registered
Joined
·
5,101 Posts
Looks real nice. Well done.
 
Top