LumberJocks

Framed wall art

  • Advertise with us
Project by GARodgers posted 01-16-2022 02:48 PM 465 views 0 times favorited 2 comments Add to Favorites Watch

I have not yet tried my hand at making a fancy cutting board, but I did experiment with the process while making this frame for a piece of family wall art.

Squares are from cedar deck pickets and the corners are pine.

2 comments so far

View BB1's profile

BB1

home | projects | blog

3173 posts in 2298 days

#1 posted 01-17-2022 02:02 AM

Interesting design! How did you hold thr artwork in place?
View GARodgers's profile

GARodgers

home | projects | blog

32 posts in 2651 days

#2 posted 01-17-2022 04:03 PM



Interesting design! How did you hold thr artwork in place?

- BB1

I cut a piece of 1/4” hardboard about 1/4” smaller inside and outside diameter and adhered it to the back. That provided a lip for the artwork to sit against in the front. Then put cardboard over the back to hold it in from behind. Not the most elegant solution, but it works.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com