| Project by KellyL | posted 12-13-2021 01:27 PM | 756 views | 0 times favorited | 6 comments |  |
 |
Finally got around to making this so I could address the multiple stacks of cut-off pieces leaning against my walls. I was inspired by this single sheet cart build I found on youtube , but I couldn’t bear to part with a still way too expensive full uncut sheet, so I had to modify the design to work with the plywood cut-offs I had on hand. Finished dimensions (34”H X 30”W X 24”D) are slightly taller and deeper than the inspiration and I’m glad to have the extra capacity. All cuts made with my Makita track saw and joints are just glued and screwed.
6 comments so far
Brodan
home | projects | blog
503 posts in 2797 days
#1 posted 12-13-2021 02:42 PM
Looks very functional. I need to make one to corral all the random pieces in the shop.
-- Dan, TN
cmmyakman
home | projects | blog
371 posts in 4151 days
#2 posted 12-13-2021 02:49 PM
You and I have the exact same mindset. I need this, but plywood is way too expensive to justify cutting up a full piece. If you didn’t tell us it was made from scraps, I wouldn’t have ever know – great job.
-- You can't fail if you don't give up.
Carol
home | projects | blog
181 posts in 2008 days
#3 posted 12-13-2021 06:54 PM
great job – totally agree on the sky high cost of plywood. unreal…
-- Carol
GaryCN
home | projects | blog
575 posts in 5429 days
#4 posted 12-13-2021 08:53 PM
In a week it will look like this
-- Quando Omni Flunkus Moritati
AJ1104
home | projects | blog
1557 posts in 3154 days
#5 posted 12-14-2021 02:31 AM
Nice. Fill that baby up!
-- AJ
KMT
home | projects | blog
608 posts in 4157 days
#6 posted 12-14-2021 01:33 PM
I like that, it’s time I rebuilt one for my shop.
-- - Martin
Have your say...