Cheese cutter jigs

  • Advertise with us
Project by Woodmaster1 posted 09-04-2021 11:41 PM 737 views 2 times favorited 6 comments Add to Favorites Watch

I notice a few cheese cutters are being made. I thought I would post pictures of the two jigs made for drilling and cutting the groove at an angle.

6 comments so far

View Jim Jakosh's profile

Jim Jakosh

26809 posts in 4353 days

#1 posted 09-05-2021 02:10 AM

Necessity is the mother of invention…and then you have them for next time..Good work on them…........Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View mel52's profile


2276 posts in 1512 days

#2 posted 09-05-2021 04:59 AM

I may have to keep this in mind. I plan making some later on. Great job !!! Mel

-- MEL, Kansas

View oldrivers's profile


2735 posts in 2814 days

#3 posted 09-05-2021 06:33 PM

That is nice, the drilling process can be a pain.

-- Soli Deo gloria!

View bondogaposis's profile


6048 posts in 3599 days

#4 posted 09-05-2021 09:58 PM

I use my Dowl-it jig for that.

-- Bondo Gaposis

View Woodmaster1's profile


1853 posts in 3834 days

#5 posted 09-05-2021 10:17 PM

I use my Dowl-it jig for that.

- bondogaposis

I use this setup because the hole is 1/4” down from the top edge. My thickness varies from 3/4” to 15/16” so the jig is easier to setup for big runs.

View exslidder's profile


73 posts in 1314 days

#6 posted 09-05-2021 11:07 PM

i made a jig up an drilled them with my shopsmith. i hade to use a dremel to carve out a little deeper where the cutter bar went through by the slot to allow for the wire. next ones i make will be a little thicker.

-- No dust on the floor....No money in the bank

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics