LumberJocks

*

  • Advertise with us
Project by LeeRoyMan posted 07-24-2021 07:07 PM 817 views 0 times favorited 28 comments Add to Favorites Watch
*
* No picture No picture No picture No picture No picture
Zoom Pictures

*





28 comments so far

View 987Ron's profile

987Ron

1967 posts in 529 days


#1 posted 07-24-2021 07:27 PM

nice build and finish

-- Ron

View splintergroup's profile

splintergroup

5732 posts in 2435 days


#2 posted 07-24-2021 07:59 PM

Looks perfect for that space, nice arch work.

What material did you use for the arched section?

Too bad you couldn’t have taken a picture before LBD came by and cleaned you out 8^)

View Tony_S's profile

Tony_S

1538 posts in 4296 days


#3 posted 07-24-2021 10:05 PM

That must be the arch you kerfed and mudded? Lookin good!

-- “Wise men speak because they have something to say; fools because they have to say something.” – Plato

View Rich's profile

Rich

7348 posts in 1802 days


#4 posted 07-24-2021 10:07 PM

Looks good, LeeRoy. I like the arch. It seems to lighten the look (if that makes any sense).

I see the wiring for a light. Handy to have electricity right there. Was that just a hollow section, or was it built out to accommodate the cabinet?

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View LeeRoyMan's profile

LeeRoyMan

2061 posts in 940 days


#5 posted 07-24-2021 11:28 PM

Thanks Ron

Thanks splinter, I just cut my own kerfs on some 3/4” mdf. with an oak veneer.

Tis the one Tony, Thanks

Thanks Rich, Niche was already there, I just made a cardboard template of the opening and built to that..
The existing wires are 24 volt, I bought a 12 volt light, so, my bad, I have to get a new light.

View Rich's profile

Rich

7348 posts in 1802 days


#6 posted 07-24-2021 11:39 PM


That must be the arch you kerfed and mudded? Lookin good!

- Tony_S

Even more impressive. I just assumed you ordered from arches.com.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View GR8HUNTER's profile

GR8HUNTER

8874 posts in 1925 days


#7 posted 07-25-2021 01:55 AM

oh man that turned out very beautiful id say another quality job done they should have more work for you now

GREAT JOB :<))))) GRATZ TOP 3 AND GR8HUNTER CHOICE LOL

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN :<))

View LeeRoyMan's profile

LeeRoyMan

2061 posts in 940 days


#8 posted 07-25-2021 02:50 AM


That must be the arch you kerfed and mudded? Lookin good!

- Tony_S

Even more impressive. I just assumed you ordered from arches.com.

- Rich


I should have..
The method I used wasn’t the best, although it was strong, it would have been easier to just glue to pieces together.

View LeeRoyMan's profile

LeeRoyMan

2061 posts in 940 days


#9 posted 07-25-2021 02:53 AM



oh man that turned out very beautiful id say another quality job done they should have more work for you now

GREAT JOB :<))))) GRATZ TOP 3 AND GR8HUNTER CHOICE LOL

- GR8HUNTER


Thanks Tony
Yep, Client want’s me to make a bookshelf that opens with a hidden safe behind it.
I did this for a friend, and only charged him for materials. Maybe I can make some $$ up on the bookshelf. :)

View swirt's profile

swirt

6521 posts in 4185 days


#10 posted 07-25-2021 03:06 AM

That came out great. A nice design that fits the space perfectly.

-- Galootish log blog, http://www.timberframe-tools.com

View Rodrick's profile

Rodrick

47 posts in 388 days


#11 posted 07-25-2021 03:33 AM

Very nice….and nice finish as well!

View LittleBlackDuck's profile

LittleBlackDuck

7891 posts in 2034 days


#12 posted 07-25-2021 04:29 AM

Nice LRM...

Not much to say… casks won’t fit into the bottom half ”matrix”.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Rich's profile

Rich

7348 posts in 1802 days


#13 posted 07-25-2021 04:35 AM


Not much to say… casks won t fit into the bottom half ”matrix”.

- LittleBlackDuck

A Cask of Amontillado, dear Fortunato?

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View LittleBlackDuck's profile

LittleBlackDuck

7891 posts in 2034 days


#14 posted 07-25-2021 06:18 AM


Not much to say… casks won t fit into the bottom half ”matrix”.

- LittleBlackDuck

A Cask of Amontillado, dear Fortunato?

- Rich


Can you get 2×2L for under $10?

-- If your first cut is too short... Take the second cut from the longer end... LBD

View James E McIntyre's profile

James E McIntyre

1460 posts in 2505 days


#15 posted 07-25-2021 04:39 PM

Nice custom work. Looks like the space was just wait for the wine storage cabinet.
When will it be filled so I can stop by for the tasting? I promise I won’t spit it out in the bucket and won’t be a camper.

-- James E McIntyre

showing 1 through 15 of 28 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com