Coffee Scoup

  • Advertise with us
Project by racerglen posted 01-06-2011 03:33 PM 2109 views 2 times favorited 3 comments Add to Favorites Watch

From neighbour’s plum tree, finish is gloss varathane. I choose my wood, drill the hole with a forstner bit then bandsaw, belt sand, carve and finaly
use a flap sander wheel in my drill press as the last stage before finishing. The hole size matches an old Nabob scoup my Mom had.
I find working from the hole outward saves grief holes already in the wood when I get there !

-- Glen, B.C. Canada

3 comments so far

View Doug's profile


1247 posts in 4006 days

#1 posted 01-06-2011 11:34 PM

I had to do a double take on your scoop. At first I thought it was a different type of “scoop” used for a different type of activity. Sorry about that.

-- Doug

View Konquest's profile


171 posts in 4689 days

#2 posted 01-07-2011 05:34 AM

I saw quite a few of those “scoops” sitting on people’s coffee tables in college…

-- 9 3/4 fingers remaining.

View racerglen's profile


3112 posts in 4025 days

#3 posted 01-07-2011 02:09 PM

Hmm.. There’s no airhole in the stem guys.. ;-)

I have a couple of others to post but given the uproar elswhere perhaps I’ll hold off..But it’s good to have figured out the way to get the pictures on the site finaly..
Much more to come if only I can get the camera back from SWMBO !

-- Glen, B.C. Canada

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics