LumberJocks

1912 Model T Ford Torpedo Runabout

  • Advertise with us
Project by Willem posted 05-14-2021 08:50 PM 511 views 0 times favorited 8 comments Add to Favorites Watch

My version of the 1912 Model T Ford Torpedo that I build. Not perfect but I try.





8 comments so far

View recycle1943's profile

recycle1943

5495 posts in 2745 days


#1 posted 05-14-2021 10:28 PM

It doesn’t have to be perfect to be darn nice like this one

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View Redoak49's profile

Redoak49

5274 posts in 3112 days


#2 posted 05-14-2021 11:56 PM

Very nice

View htl's profile

htl

5470 posts in 2282 days


#3 posted 05-15-2021 01:05 AM

Way cute and had to be a ton a fun to make!!!

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264

View woodbutcherbynight's profile

woodbutcherbynight

9633 posts in 3532 days


#4 posted 05-15-2021 01:48 AM

Fantastic

-- Live to tell the stories, they sound better that way.

View crowie's profile

crowie

4675 posts in 3074 days


#5 posted 05-15-2021 06:09 AM

That’s a reasonably complicated build sir so for my money it gets a star!

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View Vítězslav Kačor's profile

Vítězslav Kačor

365 posts in 483 days


#6 posted 05-15-2021 02:46 PM

beautiful work

-- Vítek

View GR8HUNTER's profile

GR8HUNTER

8544 posts in 1836 days


#7 posted 05-15-2021 02:55 PM

WHERE did you get that awesome FORD badge ? that add to this GR8 build GREAT JOB :<)))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN :<))

View Willem's profile

Willem

25 posts in 796 days


#8 posted 05-16-2021 06:36 AM



WHERE did you get that awesome FORD badge ? that add to this GR8 build GREAT JOB :<)))

- GR8HUNTER


Hi there. I use a laser printer and print the wording (or in this case, the badge). Then I stick sellotape over the picture and rub on the picture. The ink then transfer to the sellotape. Then I cut out the picture and lay it in water for a few minute. Then very gently rub off the white paper on the back of the sellotape. Don’t worry, the glue on the sellotape won’t get off. Then I use a cloth and dab the access water on the glue side of the sellotape off. Then just stick the badge on the required place. Make sure the surface where you are going to stick the badge on is smooth. I even stick my badges on after I have varnished the model. Hope this will help you.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com