LumberJocks

Funerary Urn

  • Advertise with us
Project by HankLP posted 04-17-2021 05:03 AM 437 views 2 times favorited 3 comments Add to Favorites Watch

Built from Iroko which was very easy to work with. A Rockler Lock Miter router bit was used to join the corners, and blind dowel holes were used to connect the top and bottom. The pictures include a template used to align the dowel holes. Extra attention was paid to insure the template had the correct orientation, tops to bottoms, and sides 1 to 4 matching… whew!

The lock miter was a first for me. The setup instructions were a bit confusing at first, but you can still learn almost anything on the internet. It took a few setup tests on scrap – planed to the same thickness as the finish material – but it turned out well with crisp corners. The truncated pyramid was done on the table saw using a tall fence board. Finished up with OSMO which brought the grain out nicely.





3 comments so far

View Jim Jakosh's profile

Jim Jakosh

26214 posts in 4192 days


#1 posted 04-17-2021 12:14 PM

Very nice urn and I love the lock miter joints!!

Are you near Dennis Hendrickson who lives on Puget Sound in Port Orchard??

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View woodbutcherbynight's profile

woodbutcherbynight

9261 posts in 3495 days


#2 posted 04-17-2021 12:43 PM

Great work with the joinery. Beautiful looking build.

-- Live to tell the stories, they sound better that way.

View HankLP's profile

HankLP

147 posts in 1589 days


#3 posted 04-19-2021 10:55 PM

Thanks for the comments. And yes Jim, Port Orchard is our county seat, about a 30 minute drive.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com